LOW PRO 1/2″ Thick Insert

$84.98

Product# LP-INS

SaniStride® Footwear Sanitizing, replacement Inserts – Made in the USA since 2011! LP Mat System Meets ADA Specifications.


Additional/Replacements – 1/2 inch thick LOW PROFILE Shoe Sanitizing Door Mat inserts – 34″L x 18″W x 1/2″H – for use in the 1/2″ deep Stride Low Profile Standard & Runner Shoe Disinfecting mat Systems only.

OUR PROPRIETARY TRIPLE-LAYERED INSERT set within our very durable and unique rubber compound mat well is what sets the SaniStride® Sanitizer Delivery System apart from all others.

Unlike our competitor’s inserts and mat surfaces, SaniStride’s inserts are very spongy and absorbent…they retain within the 3 layers a majority of the germ-killing liquid added to them. The Sanistride® inserts are designed and constructed to have the same effect as a sponge. They hold the shoe sanitizer added by the customer within ready to inject it into the shoe treads and crevices when stepped on. SaniStride® Mat Systems perform best on level surfaces. However, on surfaces that are not quite level, the SaniStride® insert can keep the liquid from pooling on the down-hill side of the mat due to its very absorbent quality.


Note: Sanitizer solution not included – SaniStride does not sell or distribute sanitizers.

Sorry, all sales are final, no returns due to the possibility of mat contamination resulting from customer testing.


Lead time is 3-5 business days – ships UPS ground from Washington. The Low Pro insert box can hold from 1 to 10 – 1/2″ thick inserts.

Yes, we do ship to Canada, Mexico, Hawaii and Alaska! Email order info from the contact page and we will get you a quote with all fees.

Description

Shoe Sanitizing Door Mat – LOW PRO 1/2″ Thick Insert for shoe and boot sanitizing in the SaniStride® Low Profile rubber base mat.

The 1/2″ thick Low Pro replacement insert is a Sanistride® proprietary design. The double-sided LP insert is constructed of extremely durable indoor/outdoor carpet and is available with a red, yellow or blue trim. The  1/2″ thick LP insert is a Sanistride® proprietary design constructed to have the same effect as a sponge. It holds the shoe sanitizer added by the customer within ready to inject it into the shoe treads and crevices when stepped on. SaniStride® Mat Systems perform best on level surfaces. However, on surfaces that are not quite level, the SaniStride® insert can keep the liquid from pooling on the down-hill side of the mat due to its very absorbent quality.

Size – 34″L x 18″W x 1/2″H – weight dry is 2 lbs. (NOT for use in the Stride 1″ deep systems).

We suggest charging the LP insert with 108-114 fluid ounces maximum of sanitizer.


To clean – flush with plenty of clean water in a utility sink or tub. If available hose off outside and stand on its side or hang to drip dry overnight.

If you plan on using the Low Profile system 24/7, you will want a replacement Shoe Sanitizing Door Mat Insert to put into service while the original that came with your mat is being cleaned and set on edge or hung to air-dry overnight. Inserts should be replaced when both carpeted surfaces develop rolls/waves and flatten out and deeper puddling and splashing is evident. Depending on the daily amount of foot traffic and cleaning protocol, the insert life is 6 months to a year plus.

Please note: DO NOT put the insert in the EXTRACTOR, WASHER or DRYER as this will destroy the insert and its inner material.

Sanitizer solution not included – SaniStride does not sell or distribute sanitizers. Please see the Setup and Maintenance page for recommendations on sanitizer usage. And be sure to question your chemical supplier regarding the efficacy of the sanitizer you are using. A company by the name of Zogics sells an effective and inexpensive concentrated sanitizer that mixes with water called HDIS128.

Sorry, ALL SALES FINAL, NO RETURNS… Due to the possibility of contamination as a result of customer receiving, testing and re-shipping, SaniStride® does not accept returns and does not offer refunds. However, you can cancel an order within 24 hours of ordering.

 

Simple Sanitizer Mat Clean Up

Sanistride® mats have an easy clean-out protocol: Simply flush/rinse the Shoe Sanitizing Door Mat Insert and base-mat with clean water in a utility sink or with a hose. Stand or hang the insert on end to drain the water quickly and drip dry overnight. If you desire to use the System 24/7, you will want to order a replacement insert with your initial order… it is needed for the cleaning rotation process as one will need to drip dry overnight. Please see the Setup and Maintenance page for more info.

TO ASSURE THAT YOU ARE MAXIMIZING THE BIOSECURITY of your SaniStride® Mat System and your facility, the mat INSERT must be monitored for the possible build-up of CONTAMINATION of bio-materials and other debris. SaniStride® recommends the replacement of inserts within 6 months of use to assist in protecting against possible contamination build-up within the SaniStride® system.

Article – Shoe/boot washers, sanitizers… is important that they be cleaned out or reset regularly.

Additional information

Weight 2.5 lbs
Dimensions 18 × 34 × .5 in
color

Blue, Red, Yellow