Stride 2-Piece LONG Runner 1″ Deep – Disinfectant Boot Bath Mat
The Stride 1″ deep System has many commercial/industrial applications such as; Food Production/Packaging, Farm/Agriculture, Fire/Rescue, and much more… you must actually step up and onto the 1″ high Stride mat with 2″ surround ramps, minding not to trip while entering or exiting the mat.
Please be advised that for Public entries and internal passageways at hospitals, clinics, schools, Gyms, senior residences, and at home, our 1/2″ Low Profile System that meets ADA specifications might be better suited than the Stride 1″ deep mat system.
2-PIECE LONG RUNNER – DIMENSIONS
The outer dimensions when clipped together are 74″L x 23″W x 1″H
The inner dimensions (wet sanitizer surface/insert) are 68″L x 18″ W x 1″ Deep
The overall weight of the 2 pieces with dry inserts equals 27 Lbs.
Fill EACH section with 1.25-1.5 gallons of disinfectant of your choice… a concentrated Quaternary disinfectant that you mix with water at the manufacturer’s dilution rate is suggested and cost-effective. Please do not use chlorine bleach as it will damage the system and void the 3-year warranty on the rubber base mat.
Because of our proprietary insert design, there are no waves and little to no splashing… a very effective shoe sanitizer delivery system without the mess of the open puddle boot dip or boot bath mats. The 1″ thick Stride insert is a Sanistride® proprietary design constructed to have the same effect as a sponge. It holds the shoe sanitizer within ready to inject it into the shoe treads and crevices when stepped on.
Note: Sanitizer solution not included – SaniStride does not sell or distribute sanitizers. Please see the Setup and Maintenance page for recommendations on sanitizer usage. And be sure to question your chemical supplier regarding the efficacy of the sanitizer you are choosing to use… that information will determine how often the solution needs to be replaced to be effective at killing germs on shoes.
Sorry, ALL SALES FINAL, NO RETURNS… Due to the possibility of contamination as a result of customer receiving, testing and re-shipping, SaniStride® does not accept returns and does not offer refunds. However, you can cancel your order within 24 hours.
Simple Sanitizer Mat Clean Up
Sanistride® mats have an easy clean-out protocol: Simply flush/rinse the insert and base-mat with clean water in a utility sink or with a hose. Stand or hang the insert on end to drain the water quickly and drip dry overnight. If you desire to use the System 24/7, you will want to order a replacement insert with your initial order… it is needed for the cleaning rotation process as one will need to drip dry overnight. Please see the Setup and Maintenance page for more info.
Please note: DO NOT put the insert in the EXTRACTOR, WASHER or DRYER as this will destroy the insert and its inner material.