SPORTS 1/2″ Insert – Footwear Sanitizer Mat insert – replacement
The 1/2″ thick SPORTS footwear sanitizer mat insert is a Sanistride® proprietary design. The double-sided insert is constructed of extremely durable indoor/outdoor carpet and is available with a red, yellow or blue trim. The 1/2″ thick Sports insert is a Sanistride® proprietary design constructed to have the same effect as a sponge. It holds the shoe sanitizer within ready to inject it into the shoe treads and crevices when stepped on.
Size – 17″L x 15″W x 1/2″H – weight dry is just under 1 pound.
We suggest charging the Sports insert with 3-4 cups maximum of sanitizer.
To clean – flush with plenty of clean water in a utility sink or tub.
If you plan on using the Sports system 24/7, you will want a replacement insert to put into service while the original that came with your mat is being cleaned and set on edge or hung to air-dry overnight. Inserts should be replaced when both carpeted surfaces develop rolls/waves and flatten out and deeper puddling and splashing is evident. Depending on the daily amount of foot traffic and cleaning protocol, the insert life is 6 months to a year plus.
Please note: DO NOT put the insert in the EXTRACTOR, WASHER or DRYER as this will destroy the insert and its inner material.
Sanitizer solution not included – SaniStride does not sell or distribute sanitizers. Please see the Setup and Maintenance page for recommendations on sanitizer usage. And be sure to question your chemical supplier regarding the efficacy of the sanitizer you are using.
Sorry, ALL SALES FINAL, NO RETURNS… Due to the possibility of contamination as a result of customer receiving, testing and re-shipping, SaniStride® does not accept returns and does not offer refunds. However, you can cancel an order within 24 hours of ordering.
Simple Sports Shoe Disinfectant Mat System Clean Up
Sanistride® mats have an easy clean-out protocol: Simply flush/rinse the insert and base-mat with clean water in a utility sink or with a hose. Stand or hang the insert on end to drain the water quickly and drip dry overnight. If you desire to use the System 24/7, you will want to order a replacement insert with your initial order… it is needed for the cleaning rotation process as one will need to drip dry overnight. Please see the Setup and Maintenance page for more info.
TO ASSURE THAT YOU ARE MAXIMIZING THE BIOSECURITY of your SaniStride® Mat System and your facility, the mat INSERT must be monitored for the possible build-up of CONTAMINATION of bio-materials and other debris. SaniStride® recommends the replacement of inserts within 6 months of use to assist in protecting against possible contamination build-up within the SaniStride® system.