Description
Sanitizing Mat Rubber Base – Low Profile 1/2″ height with 4″ wide surround ramps –
SaniStride’s Low Profile Shoe Sanitizing Mat Rubber Base only is for use with dry chemicals or to replace or add an additional rubber base mat for the inserts already on hand in your facility. The 4″ surround ramps to just 1/2 inch height make for easy entry and exit of our Sanitizing Mat Rubber Base only.
Please be advised that for some heavy industrial and commercial uses especially in food production, our original Stride 1″ deep base-mat with a 1” thick insert included might be better suited than the Low Profile Shoe Sanitizing Mat Rubber Base only.
The Low Pro 4″ wide surround ramps & 1/2″ total mat height renders very easy crossings/on/off .
The outer dimensions of the rubber base mat are 43″L x 27″
The inner dimensions (wet sanitizer surface/insert) are 34″ L x 18″ W x 1/2″ Deep
The weight of the LOW PROFILE Shoe Sanitizing Mat Rubber Base only is 10.5 lbs
Note: Sanitizer solution not included – SaniStride does not sell or distribute sanitizers. Please see the Setup and Maintenance page for recommendations on sanitizer usage. And be sure to question your chemical supplier regarding the efficacy of the sanitizer you are choosing to use… that information will determine how often the solution needs to be replaced to be effective at killing germs on shoes. A company by the name of Zogics sells an effective and inexpensive concentrated sanitizer that mixes with water called HDIS128.
Similar to the original SaniStride 1″ STRIDE Shoe Disinfecting Door Mat system, the 1/2″ Stride LOW PROFILE Mat allows the user to take 2 steps while crossing… “Two Steps Closer to Reducing the Spread of Germs®”.
At just a 1/2” in height and with 4” wide ramps surrounding a 34″x18″ sanitizer wet surface, the Stride LOW PRO, AKA Stride LP Mat with insert in place was specifically designed for the ease of entry and exit of shoe sanitizer users. The low mat height and long width of the ramps are extremely beneficial for easy entry and exit while pushing a heavily laden cart across it to disinfect the cart wheels as well as the worker’s shoes.
Sorry, ALL SALES FINAL, NO RETURNS… Due to the possibility of contamination as a result of customer receiving, testing and re-shipping, SaniStride® does not accept returns and does not offer refunds. However, you can cancel your order within 24 hours.
The height of the LP mat at 1/2 inch could possibly fit below the swing clearance of some interior doors to straddle the entrance/exit passageway.
Simple Sanitizer Mat Clean Up for SaniStride® Shoe Disinfecting Mat Systems (insert included)
Sanistride® Shoe Disinfecting Door Mats have an easy clean-out protocol: Simply flush/rinse the insert and base-mat with clean water in a utility sink or with a hose. Stand or hang the insert on end to drain the water quickly and drip dry overnight. If you desire to use the System 24/7, you will want to order a replacement insert with your initial order… it is needed for the cleaning rotation process as one will need to drip dry overnight. Please see the Setup and Maintenance page for more info.
TO ASSURE THAT YOU ARE MAXIMIZING THE BIOSECURITY of your SaniStride® Mat System and your facility, the mat INSERT must be monitored for the possible build-up of CONTAMINATION of bio-materials and other debris. SaniStride® recommends the replacement of inserts within 6 months of use to assist in protecting against possible contamination build-up within the SaniStride® system.
Article – Shoe/boot washers, sanitizers… is important that they be cleaned out or reset regularly.
(Please note: DO NOT put the insert in the EXTRACTOR, WASHER or DRYER as this will destroy the insert and its inner material.)
